Test riding a prototype.

I’m now in the process of testing a new long board design. Which basically means I’m going to the beach and riding this new board and having some test riders ride it and get as much feed back as possible.

I took the board out twice this week in small surf….there hasn’t been much in the way of surf here for a few weeks if not more…it’s the time of the year for flat spells. Anyway, the first go out we had some small slow peelers at the point that were about waist high.

My observations:

The boards is very responsive. Like really nice power steering with a tight turning radius.

Though the surf was small I could feel the potential for good drive out of turns.

Turn backs were effortless and very smooth. As well, resetting direction after a cut back was about as seamless as I’ve ever felt.

The surprise was how well the board floats. I’m not sure if it’s the new performance foam or the high density foam on the boards perimeter.

The second go out the surf was about the same size but had a bit better strength, so I was able to set an edge on a couple waves and lay into a turn. Wow! This thing will fly out of a turn when given the input.

Also on the second go out I wanted to see how the board would trim and handle nose rides. So I worked a few waves on the forward half and third of the board with a couple nose rides. The surprise here is what a high line the board seems to hold in trim and on the nose. I can’t wait to see how this board is going to handle better, stronger and larger waves.

I’ve gotten feed back from one test rider with video too. More on that later.

The new high performance long board perimeter stringer quad, or, the P.S.Q.

9’1 X 22 ¼ and 2 ¾ thickness. With 2 1/8 bass wood perimeter stringers and high density colored foam rails on the outside of the stringers.

D.R.

An old business statement.

I happened on to the folder of the Ryder Surfboard Co. statement from 5/28/66 to 7/31/66 yesterday. Some interesting numbers in the inventory of my little surfboard business in this hand written document of 41 years ago.

From what was in some of the columns you would think that the numbers were just made up, hard to believe what they say really. Like the sale of a new surfboard was $90. Sheets of sandpaper were 6 cents. Redwood stringers for blanks were listed at 21 cents each? That just doesn’t sound right at all, but that’s what the unit price is listed at.

How’s this for used boards… 9’8 Ryder for $62, 10’4 Ryder for $62, 9’8 Hanson $60 and a 9’8 Jacobs for $45. And then there’s the surfboard blank price of $37.63. There were no such things as short boards back then, well actually there were short boards, 9’0 was considered a short board. So the blank for 37 bucks was probably 10 foot. No doubt the materials to make a blank these days are more than that!

So the cost of a new surfboard was 90 bucks, and now a long board is more like 900 bucks. I wish the cost of housing was only ten times what it was back then. Let see if I remember right, the apartment that my wife and I rented when we were first married in 1969 was 65 dollars a month. If the cost of housing was ten times that now then that same apartment, which is only a couple blocks from my house, would be $650. But, that same apartment is more like 1200 or 1600 now, more like 20 times what it once was.

Small increase is the cost of living and cost of doing business? Used to be it was trying to keep up with the Jones, who ever they were. Now it’s more like keeping up with the cost of living.

D.R.

The book signing.

A couple weeks ago my wife and I went up to Dan Merkels gallery
in Santa Barbara where Greg Noll with author Drew Kampion and Greg’s son Jed were doing a book signing for Drew’s new book “Greg Noll, The art of the Surfboard”.

The book is full of history of Greg Noll’s surfboards and full of excellent pictures of Greg’s boards both past and present. I was unable to put the thing down for a couple days, reading the stories and taking in all the photos. For me the book brings on old memories and is an inspiration to my interests in surfboard design and crafting.

When it was my turn to have Greg sign my book I took the opportunity to tell him the story of how as a teenager I got blanks from him and learned how to shape with those blanks and later I got my first job as a production shaper at Morey-Pope, all because of him. His response….” Wow” with a big smile.

Me, my wife and Greg Noll.

Another moment that no doubt will stay with me for the rest of my days.

D.R.