Making surfboards is a specialized trade. You may be able to get schooling on composites but actually knowing the what and how of surfboard design is pretty much a learn by experience endeavor.

Most people that ride surfboards don’t think or maybe even don’t care about what makes the board they ride work the way it does. And that’s fine, but there are nuts like myself that spend hours processing through ideas about design and trying to work through problems experienced in the last surf session and how the board you were riding might be improved, or, at least how your surfing may be improved by working through a certain board design.

I see the surfboard as mainly a foil. The over all dynamic of the surfboard foil will determine how the board will ride. How much or little curve the foil has on the bottom as well as the top (deck), where and how the thickness is distributed through its length, how the deck and bottom contours are shaped from rail to rail. The curve of the outline. All play together to make the surfboard of your choosing react to wave and rider.

Riding certain board designs will determine how you surf. If you try to surf a board against the way it’s meant to be ridden over all performance will be poor, for both board and rider.

An easy example of this can be best understood by the difference between short board and long board surfing. Short boards must be ridden with a low center of gravity, knees always bent, any body extensions are short and returned to that low center. If you stand straight up on a short board, unless you are moving fast along the wave, the board will sink. A long board on the other hand you will ride almost at a full stand up. Sure you’ll bend the knees but because of the foam volume if you stand straight up the board will continue to glide down the face of the wave.

Those examples may be extreme but, you can take just about any surfboard design and if you want to get its maximum performance you need to know why it will ride a certain way and not go against it.

Single fins ride different than tri fins. Tri fins ride different than twin fins. Do you want to ride a certain board design? Learn how it works, usually by riding it, and have some fun with it. Think through your moves and try to understand what’s going on. Do you have to ride one certain kind of board? No. Is one design better than the others? Not really, it just depends on what it’s for, so ride it in conditions and style it’s built for.

You can experiment, learn, and grow your surfing.

D.R.

My Story post 10

One of my main spots or surf hangouts during my high school days was Hobson Park. Though a little smaller now because of erosion, at least it’s still there. It was there or Stanley’s, just a ¼ mile up from Hobson’s. Stanley’s is long gone.

Hobson’s is a small camp site right on the beach along Pacific Coast Highway about a 10 minute drive up the Rincon from Ventura. And, it happens to be located right at a coble stone reef. At minus tides the reef is dry, a good place for clam digs.

One of the first times I got to go to Hobson’s was with a friend and his family on a camping trip. Drove up there on a Saturday morning got situated in the camp ground did a little clam digging in the afternoon low tide and the guys mom made fresh clam chowder for dinner. Nothin’ like good clam chowder.

On Sunday morning my friend and I got up early to surf. I remember being a little spooked. Not being real familiar with the place, up early, cold weather, over cast and a bit dark. The surf was a much defined peak and the paddle out was a bit more than we expected. Not hard because of the need to push water but longer than imagined from the beach. This also meant that when we reached the line up the sets were much bigger than they looked like from the beach.

There were two other people in the lineup when we got out. Not that good of a surfer yet, I remember sitting there watching the surf go by. Paddling around so as not to get picked off, and too spooked to stroke myself into one of those, what seemed to be, large peeks. What if I didn’t make the drop and fell or couldn’t get a turn off the bottom and wiped out? The beach looked like a long way off, the water cold and dark. A swim for a lost board seemed more of a panic than the surf itself. So I just sat there.

You know… I think that’s why when the surf has a bit of size these days there are plenty kooks in the lineup. No need worry about wipe outs because they’re leashed up to their boards. Anyway, I eventually came in, probably did a shoulder hop or two but that was about it.

Well, I went back to Hobson’s plenty as my high school years progressed. Made up for that first time experience, and then some I’d guess. I’m sure the place has it’s moments but, I don’t remember the surf being that epic there, even if I went there alot. Now Stanley’s…. that’s the spot that could get epic!

I don't know who took this picture of Stanley's Dinner. But, this site was made into a freeway off ramp. For those that don't know… if you were sitting in that old panel truck and the hood was down, you’d be looking at the Stanley’s line up. Get out of the truck, suit up and grab your board, walk about 100 feet and you’d be at the waters edge. One of the favorite spots of my youth.

D.R.

My Story post 9

Before my friends and I were able to drive I was lucky to have a couple friends that could get their mom’s to drive them and their buddies to the beach on the weekends, sometimes I got to tag along.

One of the guys mom’s would take us to Will Rogers State Beach above Santa Monica along the jetties. Close to where the filming of Bay Watch was done, but like 30 years earlier of course. Anyway, she’d drop us off in the morning and then come back and get us in the afternoon.

So we’d hang at the beach all day, usually three or four of us. Thing was we could only take 2 surfboards. So a couple guys would surf while the others stayed on the beach. Then one of the guys surfing would come in and the guy on the beach got his turn to surf.

Having no wet suit and just getting out of the water, you’d get cold. We had a great remedy though. Not only did we bring surfboards but we brought skim boards too. Believe me, running around chasing a skim board can warm you up pretty good. It was a perfect combination. Go surf, get cold, go skim board, get warm. By the end of the day we were beat.

One of my other friends mom would take us just about anywhere we wanted to go. She was so cool. I remember one late winter day on the way to surf along Malibu. We were probably thinking of going to County Line. But when we got to the top of Malibu Canyon and looked down you could see lines coming in around the point at Malibu.

An odd south swell had showed up in late winter. The point was about head high, and long before there were surf reports or web cams. So guess what? there were very few people that knew. We got Malibu without a crowd! Miracles do happen.

I had another friend whose dad was a salesman and would have to do a fair amount of traveling up and down the coast in Southern California. Because his dad would be driving around during the week summer days he’d get the ole man to drop him and a buddy or two at the closest beach where his dad had to do some sales calls.

The first time I surfed ‘C’ Street was on a summer day when we were dropped off there. Little did I know, at 15 years old, on that nice sunny summer day that I’d grow up and settle down 5 blocks from ‘C’ Street. Once we got to stay at Doheny Beach for a couple days. That was before the break water. Man that place was fun.

The nice thing about good memories. Think back, close your eyes, and live it all again for a moment or two.

D.R.

Milestones, everybody has them…. an important event or turning point. As well, a marker that tells us how far we’ve gone. For the New Year most of us look back and reflect at least a little and say we made it through another one. The marker.

Important events can happen any time of course, and can be something pleasant or not so pleasant. A turning point? Sometimes we can go a long while before we even notice we had one. Then it’s “hey, things are different now and you know what? It all started way back when”. I’ve been going through a turning point for the last half of this…now past year. So I guess you could say it’s not a turn but a long curve. I’ll save the story for another time.

Sometimes turning points can really change your life direction. When it comes to your vocation all of us will usually have a few through out our working days.

I’d have to say for sure one of the biggest turning points in my surfboard building career came one day early in the year of 1967. I was out surfing at the point in Ventura when my friend Peter came racing out into the lineup and said “Dennis, Bob Cooper is on the beach and he’s looking for a shaper. I told him I know a guy that shaped, he’s out there surfing right now. Would you like me to go out and tell him you’d like to talk to him?”

Cooper had come down to watch the surf while on his lunch break. He was Forman of The Morey-Pope shop at the time.

I paddled in, met Cooper and set up a time to go by the MP shop. When I got there I was directed to an empty shaping bay, given a blank and out line and told to shape a board. When I was finished Cooper gave it a look over and said “looks like you can shape” and gave me a job. I was only 18 years old, very fortunate and little did I know it at the time but, my life was going to be changed forever.

At the New Year we look back and we look forward. And who knows what events and turning points there may be. Work hard, do your best and be hopeful.

Happy New Year!

D.R.

Surf memories around Christmas time.

I was given a surfboard blank for Christmas when I was 14 that became my first surfboard.

Got my first wet suit, a farmer john, for Christmas when I was 16. Went to Malibu to try it out in the afternoon on Christmas day with my older brother, he drove, and my sisters boy friend. It was over cast and freezing cold. And Malibu is a summer break not a winter break so it was dead flat. But, ‘ya gotta go out anyway’. Sat there on my board and froze. Farmer john wet suits were about all there was at the time.

It’s nice if you live at the beach, because of the holiday, crowds can be a bit thinned which makes Christmas day a good surfing day.

A few years ago my son gave me a case of surf wax for Christmas. I still haven’t gone through it all.

Tools for keeping my block planes and finger planes sharp… only a guy gets stoked over tool gifts… my wife thinks of everything.

Surfing on Christmas day in Hawaii, forget the wet suit…do I miss that?

Being with family… 5 grand kids jumping around the house, we’ll have a great time.

Merry Christmas!

D.R.

Christmas day wet suit pose.

Learning to surf a shapers view post 3

Learning to surf takes time, a boat load of repetition, the right height to weight ratio surfboard and a good attitude about knowing your limitations.

It really is possible to hurt yourself and others in the water when surfing… or attempting to surf. When I was in high school there was a guy that went with his dad to the Dewey Weber shop one day after school to buy a board. Picked one out and proceeded directly to the beach at Santa Monica to try the new board out. Took the board out, caught some white water and stood up. When he lost his balance he dove off the board into 2 feet of water, hit his head in the sand and broke his neck… true story, I was there and saw it happen.

So don’t be in a rush to go pro! I know first hand how pumped you can get about surfing. But the learning curve can be steep, take it one step at a time. The best surfers are relaxed in the water. Start out by attempting to stay relaxed and as you advance the relaxed attitude will be a part of all your sessions. As well, know your limitations.

Knowing your limitations is part of the judgment thing. This past few days we’ve had some pretty good sized surf….finally! Of the west north west swell variety. North west swells in Ventura bring on a heavy long shore current that sweeps down the point rapidly. The surf was to large and the currents to strong for the beginner or novice surfer. Even so, there were some beginners attempting to go out in conditions way beyond their abilities. What happens is they get swept down the beach in the surf zone and end up at the pier, where they can then get in a world of hurt, being swept through the pier, bounced off the pilings or worse, rapped around a piling and drown. It has happened.

My personal opinion is that beginners shouldn’t attempt going out if the surf is bigger than head high. So how do you judge the size of surf? If there are people out in the lineup watch to see what a wave looks like when someone is riding one. If when a rider is standing close to straight up and the wave is curling about where their head is then the wave is head high. It’s also a good idea to watch the surf for a good 10 to 20 minutes to see how far apart the sets are and if by chance when you first get to the beach there has been a long lull between sets and you just haven’t seen the bigger ones. Also if smaller waves that are breaking inside of the surfers in the line up and you don’t see anyone riding the smaller waves it’s most likely because the sets are bigger and the surfers in the water are out far enough so as not to get picked off by the larger waves when they come.

If you get to the beach and no one is out you can judge the size of the surf by perspective. Look for an object that you can tell is a certain size and try to project its image out into the surf zone. You can also walk out to the waters edge and get a pretty good idea of what size of surf is breaking by just watching the surf for 5 or 10 minuets.

Be smart, stay relaxed, think before you go. Develop and use good judgment. And as the life guards say in Hawaii…when in doubt, don’t go out.

D.R.

My story post 8

The back yard of the house my family lived in when I was making and repairing surfboards had a big cement slab that was pretty good for skateboarding. There were some mean cracks in it, but possible to navigate.

The house we lived in before that had a killer circular drive way. The house set below the street maybe about 8 feet. So the circular drive way ramped up to street level on both ends, made for great skateboarding. I would walk to the top on one side, jump on my skateboard and ride down the drive way and up the other side, turn and ride down then up the other side again, back and forth for hours practicing and developing my skills. No doubt all that skateboarding helped my surfing. I didn’t get to the beach but once or twice a month back then but I did the skateboard thing constantly.

But how’s this for a near miss? In 1964-’65 my dad worked for a company in Newbury Park, which was about an hour drive from where we lived. Wanting to live closer to where my dad worked my parents found a lot in Oxnard Shores… a beach community that was maybe 25 minuets form where my dad worked.

The property was bought and an architect hired to design the house for the lot. The lot BTW was about 6 lots up from the beach. Well, right when my parents were shopping for a construction loan to build the house on that Oxnard Shores lot, my dad was laid off his Newbury Park job. They had actually already sold the house we lived at the time so we had to move… all be it not to Oxnard Shores.

My parents rented the house with the circular driveway that I loved to skateboard on in the interim while they found a house for the family to settle into in the same area we had been. All was not lost I guess, because the house we moved into was the house I was able to put my little surfboard shack up at.

Though sometimes I wonder what life events would have developed had we moved to Oxnard Shores. The The Campbell brothers are from Oxnard Shores… we would have most likely hooked up and surfed together… probably would have gone to school together. Duncan I can’t remember ever meeting. Malcolm and I have been acquainted for a long time. Some 6 or 8 years after the would be family move, in the early seventies, Malcolm and I were in the same geology class at Ventura College. We sat next to each other the whole semester. I never new he made surfboards until one day on a class field trip we started talking about surfing and boards. So, it seems we went to school together after all, a curious circumstance.

D.R.

Surveying Oxnard Shores property circa 1964

How much has shaping surfboards changed over the years? What has become normal now was not accepted once, or at least looked at with some scorn. Shaping machines, profilers, even molded boards are Ok. It’s interesting don’t you think, the way the surfboard industry has evolved and changed?

I can remember when one of the first shaping machines in California ramped up their business. They had to try and keep their business location secret so vandals would have a hard time finding them… Yeah, guys thought shaping machines were going to ruin everything… kill the soul of surfing. So hindering their operation was considered a good thing. Now? A shaper could get the impression that if he didn’t send his orders out to be pre-shaped by a machine his boards weren’t ‘state of the art’ and therefore of poorer quality than boards shaped by machines.

There was a time when massed produced surfboards made in a big factory by hourly employees that didn’t know the first thing about surfing was considered ‘not a good thing’. As well, surfboards made via a mold process also were considered ‘not a good thing’. Now? Massed produced boards made with traditional materials or molded sandwich construction or molded hollow core… it’s all considered good.

In the sixty’s surfboard production was pretty concentrated. In the U.S there were maybe about a dozen labels, mainly in California, that made most of the boards we all rode. Then at the turn of the decade things changed. By 1970 the industry started fragmenting. The dominating labels could not keep up to the changes being made to board design so small shops started popping up all over the west coast and east coast. The surfboard became a local thing. The board you rode came from the area you lived in or frequented for surf.

Now it seems it’s been changing into the dominate label thing again. And, with the increase in overseas production in Thailand and China it almost doesn’t make sense for the shaper that produces 1000 boards a year to make boards in the U.S. Because it’s cheaper to have a China production shop machine a shape in mass, produce boards start to finish and ship them directly to dealers.

I don’t know though… I think it’s very strange to see the little labels on surfboards that say “Made in Thailand” or “Made in China”. Call me old fashioned.

D.R.

Back in the day the way to make a surfboard was by hand, though there were a couple of pop out type manufactures in the sixties. As a matter of fact, I worked for one of them. It was early in the year of 1967, before I started working at Morey-Pope.

The company was Ventura Plastics and they made the Tiki and Ten Toes surfboards that were sold all over the U.S. When I worked for them they had licensing agreements with a number of big name surfers and mass produced models like the Duke Kahanamoku model, the Joey Cabel model etc. Something similar to what some of the molded board companies are doing today. They had a fairly large shop on Calens Rd. in Ventura and produced boards in mass. 20 or more sides laminated at a time. Which is probably nothing compared to what Thailand and China factories do these days, but none the less plenty of boards.

As surfing grew into the late 60’s some of the big name labels were making large numbers of boards. By 1969 Morey-Pope was pushing close to 200 units a week out of their Saticoy factory with a board some may remember… the Camel. I worked with two other guys in the shaping department doing Camels. One guy would route outlines on special close tolerance blanks. Me and the third guy would rough the boards out, rough sand them and turn the rails. Then they’d go back to the first guy who would then fine sand them and route the fin box. I would usually spend not more than 20 minutes doing my part.

MP was not the only label doing large numbers. My question is… where did all those boards go? And… why couldn’t those labels continue with that kind of production? More questions… Where are all the thousands and thousands of boards going that are being produced in China and Thailand now? And… how long will these companies be able to sustain the numbers being produced? There is a thing called market saturation.

Even though there are some nice mass produced boards, one thing is for sure, the boards that are mass produced don’t have the emotion of the hand crafted high end boards. Why? Because the high end hand crafted boards are being made by artisans. Making surfboards is an art craft. Art has emotion and that emotion is seen and felt in the hand crafted board. Most people call it soul, and that’s fine, but it’s really emotion.

D.R.

The tail of a RP2.
Chocolate and cocoa butter lamination with soft green and yellow pin line.

My story post 7

From day one of my surfing experience I’ve only had one surfboard that I didn’t make or shape for myself. It was a Phil Edwards model Hobie I bought used and surfed between 1965 and ’66.

Phil Edwards was well known and a very good surfer back in the day and his signature board was the real deal. Having one of his boards was kind of a prestige thing, it was a good thing to have and ride.

Now, you might think having that board would give me a great opportunity to do a little copying or borrowing for making my own boards. And you’re right but, I didn’t borrow anything. Never took the outline, or measurements. Honestly I don’t think I was smart enough to think ‘hey I’ve got this killer board here, let’s just take some numbers and use them to make a killer board like it’. I was to busy hacking away on my own, didn’t really know what I was doing, just did what I did.

Today I’ve got tools to measure boards I never thought of as a kid. Today when I need to or want to make one board the same as another I’ll measure the width from nose to tail in 6 inch increments, and the same for the thickness as well as rockers. Never dreamed of doing that as a kid. Back then it was… look at the blank…think surfboard… and hack at the blank until I had what I thought was a decent surfboard.

A good way to get a feel for a surfboard is via repairs. When you have to fix dings you’ve got to look at the board, handle it, run your hands over the areas on the board that need fixing. Feel if you’ve feathered out your patch job etc. All that can give you sight and touch memories that can be transferred into actually making one. That’s what helped me, it was the repairs I did. I looked at, held, ran my hands over a fair amount of boards which helped me see in my minds eye what a surfboard should look like. Once you’ve got the picture in your head of what a surfboard should look like you can take a blank and cut away at it here and there until the picture in your head is something you can see and feel in real life form.

Shaping surfboards is what I call an alphabet thing. You can’t just start with A then go to B then C until you get to Z and be pau ( finished ). You’ve got to see the whole alphabet all at one time. Yeah, you still start at A but when you are working at A you see B, C, D all the way through all the stages.

Somehow as a kid I could see the surfboard I wanted to make. Then went and made it… good or bad I just wanted to make it. Today I’m still amazed at the process.

D.R.

My story post 6

Thinking back to my teen years and making surfboards I've got to say I was very fortunate to have parents that supported me and my interests. Without it I would have never gotten that initial experience. All be it self taught.

The church that the family attended was growing and had just finished building a new sanctuary and church campus. There was a small modular building on the church grounds that was used for the construction office and was no longer wanted or needed at the church grounds after the project was completed. The word was put out that it was available. So I asked my parents if maybe I could get one of the modules. I was offered the middle section of the building that consisted of 4 pieces. The sides, floor and roof.

I thought if I got that building it could be put up against the back workshop of the house we lived in and all I'd need to do was make a front with a door and I'd have my own little enclosed place to make and repair surfboards. What a great Idea! I couldn't believe it, my parents said yes!

I don't know how we got that small building the 5 miles from the church to our back yard, but we did. Got the thing standing up and against the back work shop, made the front so it was enclosed, put the stands in it and started working on boards.

And work on boards is what I did. My older sister, 2 years my senior, said because of my little surfboard business she liked me. Why? "You always have money in your pocket" she said. My mom on the other hand…she could get so aggravated. I'd get a fair amount of phone calls, mainly over surfboard repairs. So she would have to go out back and tell me "you've got another phone call". I'd go in the family room where the phone was with sticky fingers from resin and the sticky resin would get transferred to the phone. Then she'd go use the phone and get sticky resin on her hands….DENNIS.. she'd scream. One of these days when we visit I've got to show her my cell phone, before I clean the sticky resin off of course.

D.R.

Learning to surf, a shapers view. Post 2

I went for another Sunday afternoon surf. Sunny, warm, and a fair amount of people out in the small low tide surf. Included in all the people there were a number of beginners or novice surfers in the water.

Once again I noticed how poorly the beginners paddle their boards. One of the things most people say to beginners is start on a longer board. But, even at that if you don’t paddle the thing in trim you will not catch waves. There were a couple guys paddling around on long boards with the noses stuck up out of the water…not in trim. I watched one of the guys paddle like crazy to catch one wave…just wasn’t going to happen with his board/body positioning…sorry.

So anyway, I’ve mentioned judgment. That’s being able to tell how fast you are moving in the water when you’re paddling, whether or not you should maneuver while paddling one direction or another to avoid colliding with someone. If you need to paddle faster to get past a breaking wave, paddle faster or slow down some in order to catch a wave.

Because surfing is about movement, having the knowledge to move freely in the water and being able to tell how your movement will affect yourself and others in the water is judgment.

Example: you‘re paddling out to the lineup, there is someone coming down the line on a wave. Depending on where you are, and the rider is, you should be able to judge if you will get in the riders way and paddle in the right direction at the right speed to not get in the riders way. At the same time if you’re the rider you should be able to judge while you’re sliding down the face of a wave if, when, and how you may need to maneuver so as not run over anyone in the water.

Well, it all that starts with paddling. So what about equipment? Yep, having the right board can make all the difference in the world.

D.R.

Learning to surf.. A shapers view.

One of the areas of my home break is a pretty good place to learn how to surf, at least during the months of May through September. The waves are usually small and the summer swells deposit sand on the beach making the place more casual. So the last few months I’ve seen my share of beginners.

Learning to surf takes time. Like just about anything else some people pick it up quickly and with some people it takes a bit longer. But there are a few things that can help improve the learning curve.

The majority of time spent in the water surfing is spent paddling. Since a lot of rides last maybe 10 seconds, one could easily spend five or ten minutes paddling around for that one 10 second ride. So if you’re going to learn how to surf make sure that you learn how to paddle really well before you catch your first wave.

You may think, “hey, I can paddle a surfboard around what’s so hard about that.”? There’s more to it than one might think. To paddle efficiently the surfboard should be in trim. In trim is when your body weight is positioned on the board so that it will plane across the water without unnecessary drag, the nose not sticking up out of the water to much or poking into the water ( pearling ). To paddle a board efficiently one should be able to maneuver, turn from left to right, while paddling. You should also be able to speed up or slow down while paddling.

If you can’t paddle well you will find yourself getting in other peoples way in the water, which can cause accidents and get people hurt. As well if you can’t paddle well you will have a hard time catching waves. If you can’t catch waves you’ll never learn to surf.

And, if you can paddle well you will begin to develop judgment. Without judgment learning to surf is very difficult.

D.R.

My Story post 5

My older brother did a little illustrating during his high school years and while I was making my first surfboard he took it upon himself do design a label for it. You can’t have a surfboard without a label.

I’d made copies of that label and used it for all the boards I made during my teens. I don’t really remember how many boards I made with that make shift label. I’d guess 8 or 10. The hard part was getting blanks. Unlike the first blank I made a board from that was pretty much already molded into a shape, I wanted blanks to shape. The blank companies, Walker and Clark, wouldn’t sell to a kid working in his parents back yard. So what’s a guy to do?

Some how I found out that Greg Noll made his own blanks and I got the hair brained idea that maybe I could buy blanks from him. What the heck, it doesn’t hurt to ask. So I made the trip to Hermosa Beach walked around the Greg Noll shop until I found the man and when I found him I basically said, “Hi, I make surfboards but kinda have a hard time getting blanks, would you sell me some?”

What was I thinking? A 16 year old kid from nowhere standing in the office of a surfing icon and asking him some dumb questions. As I remember it, we conversed for a few minutes and then he said “ Ok, I’ll sell you some blanks.” So I left that day with a couple blanks and returned some weeks later and got a few more.

Resin and fiberglass was easy to get so now with blanks my little surfboard business was in full bloom. I actually had guys I talked into making boards for. The hard part for me was not sneaking off to the beach with a new board I made for someone and try it out before they came to pick it up.

D.R.

I've worked at this surfboard thing for a long time and one of the things that has bothered me is how much resin gets wasted in the lamination, or fiberglassing process.

It takes a certain amount of resin to saturate the fiberglass cloth over a bottom or deck of a board, but in order to "wet out" the lap the most common technique is to curtain the cloth that hangs down over the rails of the board with a resin pour. It takes a fair amount of resin to get the cloth that becomes the lap saturated and in the process maybe at least half the resin used to wet the lap ends up on the floor. The floors where surfboards are laminated are lined with a covering for protection.

Anyone that has ventured into a laminating room knows… there is plenty of hardened resin on the floors in the shape of a surfboard around the stands. The stuff builds up over time making the floor uncomfortable to walk on. At that point the floor covering needs to be picked up and a new floor covering is put down until the resin builds up again and then… repeat. Some shops build trays that are attached to the stands to catch the lap resin. The trays are lined with plastic so after the resin dries it can be lifted out of the tray and discarded. The floors stay clean longer but usually will need a new covering over the long run.

Photo by Matthias Arni

Some laminators are really efficient in their application and technique using less resin than others do to get the lap done. I for one am not one of those guys. But, over the last month I’ve been perfecting a process using a small foam roller on my laps. The technique provides good resin saturation and tucks the lap at the same time. There is very little resin dropped on floor and easily a third less resin used over all when laminating a board.

They say… “you can’t teach an old dog new tricks”. Well, this dog is stoked! I am now not only saving material but this new technique gets the job done better too. A better job, a better surfboard.

D.R.

Are you like me… think back to times past and remember a certain surfboard you had and wish you still had it?

Like the first board I made would be nice to have for reference. But the second board I made was a refurbished balsa. Stripped the glass off of a 9 foot something cut it down and reshaped it into an 8’6. I can remember really liking that balsa board. I don’t know though, if I had it now I might be embarrassed to say I made it, who knows what it really looked like? Memories aren’t always real accurate. It was fun to ride though.

A couple years ago my once business partner Blinky heard of an old MP Blue Machine with my initials on it that was back in Maine or someplace east. He made an offer to the owners for a brand new Machine I’d made in exchange for the old one. The offer was accepted and Blinky made the exchange. The board was an early one too, proven by the label that was not like the Machine label once the model got marketed. I really wanted to see that old board when he got it but, when I did see it… well…it was just ok. Yeah, it was an early one, not as tuned in as I’d have liked to see. Humbling.

Yeah, I wish I had a few more of those memories in solid form. Something to hold, look at, feel. An old Vee bottom would be nice, the last MP I made myself… there are a few. Don’t know where I would keep them but it would be nice to have a few more of those old boards.

D.R.

My story post - 4

I don’t remember what the time period was but I’d guess it was by late spring of ’63 I had my board finished and ready to go to the beach. I didn’t live in a beach town so it wasn’t that easy to go surfing. But I did have a few friends that wanted to surf too so I got rides now and again and began the learning curve having gotten all the basics from surfing lessons.

It’s interesting the things that stick in our memoirs. Early memories of surfing for me are scattered around mostly large events like the family vacations to Newport Beach. Six to eight days of surfing in a row was a big help to learning.

The first family Newport outing that I got to take a surfboard on was in ’64. We stayed in Balboa on the bay side down the peninsula at about the Balboa pier. Surfing was done at the Newport pier. So I’d walk the distance between the to piers everyday to surf for a few hours before the black ball went up. Sometimes I’d get my brother to help me carry that 30lb board of mine, if I let him ride it a little. One guy at the nose one guy at the tail, off we’d go to Newport pier. I think I let him ride it a bit less than a little because he lost interest in helping after a few days so I ended up going the distance by myself.

A blanket neatly folded into an 18 inch square was the padding used on top of my head where the board would be perched the mile or so walk for a daily surf. Lucky thing I had a flat top hair cut!

Circa ’64, posing with family for a picture just before we took off for Newport Beach? You gotta believe I would do it if it meant a week of surfing. My mom on the left, my older sister’s friend, next my younger brother and sister then my older sister and me on the right. My surfboard tied to the luggage rack with all the other stuff. We actually all piled into that Rambler for the 2 hour drive!

D.R.

My story post 3

So I had a surfboard blank. And as would be, I got around $20 from my grand parents for Christmas. I don’t think I waited more than a day after Christmas to get someone to drive me to the Van Nuys Standard Brands Paint store, you remember Standard Brands? That was like the original discount home center, and they carried resin and fiberglass. So I used my Christmas money to by the fiberglass and resin for my surfboard. I was set.

Surely no one dreamed of where this surfboard thing was going at the time. But, I think my parents were quite supportive of me and how much I wanted to make a surfboard and go surfing. No doubt it some times bugged the heck out of them. At the same time seems it became a good tool for them too. Any time I’d get myself into trouble they had the “ok you’re on restriction” line and it would be no more surfing or surf stuff for X number of weeks. Yeah, but did they know, I would hide in my closet to look at the latest issue of surfer magazine?

I got started on my surfboard. Had to sand the blank a bit and clean it up. Cut it in half and glue a ¾ inch redwood stringer in it. Clean the stringer up. Then glass it. Sand the glass job. And the fin? I made one in wood shop. Mahogany with a Maltese cross cut out of it. I got some orange pigment and did the final color work of stripes along the stringer and panels along both sides of the board. All in all it turned out good enough, probably weighed in at about 32lbs. The picture is me in the first stages of making my first surfboard.

My story post - 2

Since I had taken surfing lessons and wanted to continue surfing I needed a surfboard. Didn’t need a board for the lessons because they were provided. Surfboards back in the early sixties were a good hundred bucks and this 14 year old didn’t have that kind of money. Nor were my parents going to spring for one. Back in the day the kids in my family including me, didn’t just get stuff, we had to work for it.


Dave Sweet made his own blanks in the sixties and made them available retail. My parents with the help of my older sisters boy friend Jerry, a surf guy, got this bright idea to get me one of the Sweet blanks for a Christmas present in ’62. I still remember that Christmas day. Everyone opening presents including me, then I get maybe a shoe box size gift. I open it to find a key inside and am told it’s a key to the lock on the garage door. Everyone says "go out unlock and open the garage door". I have no idea what is going on but go ahead and go out side, everyone following me, and open the garage door... what do I see? A surfboard blank! I was so stoked, a blank put me one step closer to having my own board.

So I got started with surfing.

And in a nut shell, I ended up doing board repairs and making some surfboards during my high school years. Moved to Ventura in 1967 and got a job shaping for The Morey-Pope Co. where I shaped boards for John Peck, Bob Cooper and Bob McTavish. Cofounded William Dennis Surfboards, Shaped for Wilderness Surfboards Greenough Designs during their first season. I’ve lived on Kauai for 9 years where I shaped for Hawaiian Blades and Dick Brewer. After returning to Ventura I’ve shaped for Walden Surfboards and as well, working on my own line of boards.

I still like the ocean and live about 5 blocks from the Ventura Pier. Surf as much as time allows… my son is my surf buddy. Miss Kauai often. Hang with me kids and grand kids…teaching my oldest granddaughter to surf. And in general think about making good top quality surfboards.

Why should I make top quality surfboards? Because… I have a very deep history in surfboard construction and design, with some of the most respected names in the industry, a heritage that should not be let down. It’s who I am and what I do. I’m happy with that and I like it very much.